Zanussi ZEF 226 Folheto de instruções - Página 10

Procurar online ou descarregar pdf Folheto de instruções para Congelador Zanussi ZEF 226. Zanussi ZEF 226 20 páginas. Zanussi instruction freezer zfa 96 w

Imprimir página

SOMETHING NOT WORKING

If the appliance is not working correctly, please carry out the following checks before contacting your local

Zanussi Service Force Centre

Symptom

No power to the appliance

The temperature in the freezer section is too high

The freezer door will not open

The compressor runs continously

Excessive frost and ice has built up

Noise

If after the above checks your appliance still does not operate correctly, contact your local Zanussi Service

Force Centre.

In-guarantee customers should ensure that the above checks have been made, as the engineer will

make a charge if the fault is not a mechanical or electrical breakdown.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

Solution

Check there is power at the socket.

Check there is not a power cut by checking the

household lights.

Check the fuse has not blown.

Check the thermostat control knob is turned to the

correct setting relative to ambient conditions.

Check the ambient temperature is within the

appliance's operating limits, please refer to the

installation section in this instruction book.

Relocate the appliance if necessary.

Has door just been opened? If so leave for a few

minutes to allow the air pressure to equalise.

Adjust the thermostat control knob to give correct

temperature control. See "Setting the temperature".

Check that the doors are closed.

Large quantities of food have recently been placed in

the cabinet and/or door is frequently opened.

Check that air ventilation is not obstructed.

Ensure the doors are not left open.

Check that nothing is preventing the doors from

closing.

Is the door gasket intact and clean.

Has advised periodic defrosting been carried out.

Refer to normal operating sounds.