Zanussi ZFT10210WA Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Congelador Zanussi ZFT10210WA. Zanussi ZFT10210WA 16 páginas.
Também para Zanussi ZFT10210WA: Manual do utilizador (17 páginas)

Imprimir página

1. Remove the plug

from the power sock-

et.

2. Tilt back the appli-

ance carefully so that

the compressor can-

not touch the floor.

3. Unscrew the left

feet.

4. Unscrew the

screws of the door

bottom hinge.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Win-

ter), the gasket may not fit perfectly to the cabi-

net. In that case, wait for the natural fitting of

the gasket.

In case you do not want to carry out the above

mentioned operations, contact the nearest After

Sales Service Force. The After Sales Service

specialist will carry out the reversibility of the

doors at your cost.

Electrical Connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified electrician or competent person.

Warning! This appliance must be earthed.

The manufacturer declines any liability

should these safety measures not be observed.

www.zanussi.com

5. Take off the appli-

ance door by pulling it

slightly downwards.

6. Unscrew the top

door hinge pin of the

appliance then screw

it back on the other

side.

7. Fit the appliance

door on the upper

door hinge pin.

8. Remove the lower

hinge. Put over the pin

in the direction of the

arrow.

9. Unscrew and install

the screw on the op-

posite side.

10. Install the lower

hinge on the opposite

side leaving the posi-

tion of the door un-

changed.

11. Screw in the one

screw in the place set

free on the other side

as well as the right

feet.

Important! The wires in the mains lead are

coloured in accordance with the following

code:

A Green and Yellow:

C Brown:

12. Remove and install

the handle (if fore-

seen) on the opposite

side.

13. Reposition, level

the appliance, wait for

at least four hours and

then connect it to the

power socket.

Earth

Live