Zanussi ZFU23400WA Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Congelador Zanussi ZFU23400WA. Zanussi ZFU23400WA 16 páginas.

Imprimir página

1. Remove the plinth.

2. Unscrew and re-

move the lower hing-

es.

3. Remove the door.

7. Unscrew the pin

(A) and screw it on

the opposite side.

8. Remove the cap

(B) and position it on

the opposite side.

9. Screw the lower

hinges.

10. Refit the plinth.

Environmental concerns

The symbol

on the product or on its

packaging indicates that this product may not

be treated as household waste. Instead it

should be taken to the appropriate collection

point for the recycling of electrical and

electronic equipment. By ensuring this product

is disposed of correctly, you will help prevent

4. Unscrew the upper

pin and screw it on

the opposite side.

5. Refit the door.

6. Make sure the

edge of the door is

parallel with the edge

of the top.

11. Stand the appli-

ance upright.

12. Fit the handle on

the opposite side and

put the plastic caps

(contained in the in-

structions bag) in the

free holes.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Win-

ter), the gasket may not fit perfectly to the cabi-

net. In that case, wait for the natural fitting of

the gasket.

In case you do not want to carry out the above

mentioned operations, contact the nearest After

Sales Service Force. The After Sales Service

specialist will carry out the reversibility of the

doors at your cost.

potential negative consequences for the

environment and human health, which could

otherwise be caused by inappropriate waste

handling of this product. For more detailed

information about recycling of this product,

please contact your local council, your

household waste disposal service or the shop

where you purchased the product.