Zanussi ZRB638FW Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Congelador Zanussi ZRB638FW. Zanussi ZRB638FW 16 páginas. Fridge freezer
Também para Zanussi ZRB638FW: Manual do utilizador (12 páginas), Manual do utilizador (13 páginas)
1
Important! The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow:
1
Brown:
3
Blue:
5
As the colours of the wires in the mains lead of this appli-
ance may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and yellow to the
terminal marked either with the letter "E" or by the
earth symbol
or coloured green and yellow.
2. Connect the wire coloured blue to the terminal either
marked with the letter "N" or coloured black.
3. Connect the wire coloured brown to the terminal ei-
ther marked with the "L" or coloured red.
4. Check that no cut, or stray strands of wire is present
and the cord clamp
sheath.
5. Make sure the electricity supply voltage is the same
as that indicated on the appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug fitted
In the event of having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved (BS 1362) fuse must be
used.
10
2
Earth
Live
Neutral
4
is secure over the outer
Warning! A cut off plug inserted into a 13 amp
socket is a serious safety (shock) hazard. Ensure
that it is disposed of safely.
Rear spacers
You can find the two spacers in the bag with documenta-
tion.
Do these steps to install the spacers:
1. Release the screw.
3
2. Engage the spacer below the screw.
4
3. Turn the spacer to the right position.
5
4. Tighten again the screws.
Levelling
When placing the appli-
ance ensure that it stands
level. This can be achieved
by two adjustable feet at
the bottom in front.
Removing the shelf holders
2
.
Your appliance is equipped with shelf retainers that make
it possible to secure the shelves during transportation.
2
1
3
4