Zanussi ZRT 1646 Livro de instruções - Página 9

Procurar online ou descarregar pdf Livro de instruções para Congelador Zanussi ZRT 1646. Zanussi ZRT 1646 16 páginas.

Imprimir página

If the appliance is not working correctly, please carry out the following checks before contacting Service

Force.

Problem

No power to the

appliance

The temperature in the

appliance is too high

The temperature in the

appliance is too low

Excessive frost and ice

has built up

The appliance is noisy.

Water under the salad

drawer.

If after the above checks your appliance still does not

operate correctly, contact Service Force.

Please note that it will be necessary to provide proof

of purchase for any in-guarantee service calls.

In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your

local Service Force Centre by telephoning:-

Your telephone call will be automatically routed to the Service Force Centre covering your post code area.

For the address of your local Service Force Centre and further information about Service Force, please visit

the website at www.serviceforce.co.uk

Before calling out an engineer, please ensure you have read the details under the heading "Something Not

Working."

When you contact the Service Force Centre you will need to give the following details:

1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number of the appliance (found on the rating plate)

5. The purchase date

Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee

service calls.

For Customer Service in Ireland please

Zanussi - Electrolux

Electrolux Group (Irl) Ltd

Long Mile Road

Doublin 12

Republic of Ireland

Tel: +353 (0)1 4090751

Email: [email protected]

Something N

Possible Cause

No power at the socket.

There is a power cut.

The fuse has blown.

Thermostat control knob is set at „0".

The appliance is located in an unsuitable position.

The thermostat control knob is set too low.

The thermostat control knob is set too high.

The door has been left open.

Something is obstructing the door.

The door gasket is dirty.

The appliance is not level.

The drain hole is blocked.

Ser

vice and Spar

Ser

vice and Spar

ot W

In-guarantee customers should ensure that the

above checks have been made, as the

engineer will make a charge if the fault is not a

mechanical or electrical breakdown.

08705 929929

orking

Solution

Check there is power at the socket.

Check there is not a power cut by checking the

household lights.

Check the fuse has not blown.

Check the thermostat control knob setting.

Check the ambient temperature is within the

appliances operating limits of 16 °C to 32 °C.

Check that the thermostat control knob is turned to

the correct setting relative to ambient conditions.

Set the thermostat control knob to a warmer

position.

Check the door has not been left open.

Check nothing is preventing the door from closing.

Check the door gasket is intact and clean.

Check if the appliance stands stable (all four feet

should be on the floor).

Check the drain hole is not blocked (see

'Maintenance and Cleaning').

e P