Zanussi ZRT724W Manual do utilizador - Página 32

Procurar online ou descarregar pdf Manual do utilizador para Congelador Zanussi ZRT724W. Zanussi ZRT724W 37 páginas. Fridge freezer
Também para Zanussi ZRT724W: Manual do utilizador (37 páginas)

Imprimir página

6. Unscrew the bottom far

side screw and install on

the opposite side.

10. On the opposite site,

install the hole covers pro-

vided within the accessory

bag.

1) If foreseen

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that case,

wait for the natural fitting of the gasket.

In case you do not want to carry out the above men-

tioned operations, contact the nearest After Sales Serv-

ice Force. The After Sales Service specialist will carry

out the reversibility of the doors at your cost.

Electrical connection

Before plugging in, ensure that the voltage and frequen-

cy shown on the rating plate correspond to your domes-

tic power supply.

Environmental concerns

The symbol

on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

7. Unscrew the top door

holding pin.

11. Tighten the hinge.

Make sure that the doors

are aligned.

8. Screw the pin back on

the other side.

12. Remove and install the

handle

The appliance must be earthed. The power supply cable

plug is provided with a contact for this purpose. If the

domestic power supply socket is not earthed, connect

the appliance to a separate earth in compliance with cur-

rent regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above

safety precautions are not observed.

This appliance complies with the E.E.C. Directives.

appropriate collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

9. Fit the doors into the

pins and install the doors.

Install the hinge.

13. Reposition, level the

appliance, wait for at least

four hours and then con-

nect it to the power socket.