Zanussi ZUAN28FW Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Congelador Zanussi ZUAN28FW. Zanussi ZUAN28FW 49 páginas.
Também para Zanussi ZUAN28FW: Manual do utilizador (17 páginas), Manual do utilizador (17 páginas)
Imprimir página
Overall dimensions ¹
H1 *
mm
W1
mm
D1
mm
¹ the height, width and depth of the appliance
without the handle and feet
* including the height of the top hinge (10 mm)
Space required in use ²
H2
mm
W2
mm
D2
mm
² the height, width and depth of the appliance
including the handle, plus the space necessary for
free circulation of the cooling air
Overall space required in use ³
H2
mm
W3
mm
D3
mm
³ the height, width and depth of the appliance
including the handle, plus the space necessary for
free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum
angle permitting removal of all internal equipment
LOCATION
Refer to the installation instructions for
the installation.
This appliance is not intended to be used as a built-
in appliance.
In case of different installation from freestanding
respecting space required in use dimensions, the
appliance will function correctly but energy
consumption might increase slightly.
To ensure appliance's best functionality, you should
not install the appliance in the nearby of the heat
source (oven, stoves, radiators, cookers or hobs) or
in a place with direct sunlight. Make sure that air
can circulate freely around the back of the cabinet.
6
This appliance should be installed in a dry, well
ventilated indoor position.
To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the
1860
minimum distance between the top of the cabinet
shall be maintained. Ideally, however, the appliance
595
should not be positioned below overhanging wall
units. One or more adjustable feet at the base of
635
the cabinet ensure that the appliance stands level.
1900
600
706
This appliance is intended to be used at ambient
temperature ranging from 10°C to 43°C.
1900
660
1213
ELECTRICAL CONNECTION
•
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
•
The appliance must be earthed. The power
supply cable plug is provided with a contact for
this purpose. If the domestic power supply
socket is not earthed, connect the appliance to
a separate earth in compliance with current
regulations, consulting a qualified electrician.
•
The manufacturer declines all responsibility if
the above safety precautions are not observed.
CAUTION! If you position the
appliance against the wall, use back
spacers provided or keep the minimum
distance indicated in the installation
instructions.
CAUTION! If you install the appliance
next to a wall, refer to the installation
instructions to understand the
minimum distance between the wall
and the side of the appliance where
door hinges are to provide enough
space to open the door when the
internal equipment is removed (e.g.
when cleaning).
The correct operation of the appliance
can only be guaranteed within the
specified temperature range.
If you have any doubts regarding
where to install the appliance, please
turn to the vendor, to our customer
service or to the nearest Authorised
Service Centre.
It must be possible to disconnect the
appliance from the mains power
supply. The plug must therefore be
easily accessible after installation.