Zanussi ZVF 190 R Folheto de instruções - Página 10

Procurar online ou descarregar pdf Folheto de instruções para Congelador Zanussi ZVF 190 R. Zanussi ZVF 190 R 11 páginas.

Ice-cube production

This appliance is equipped with trays for the

production of ice-cubes.

Fill these trays with water to 3/4 of their height, then

put them in the freezer.

The ice-cubes may be shaken out from the trays by

simply twisting; do not use metallic instruments to

remove the trays from the freezer.

Frost should be removed with the special plastic

scraper provided, whenever the thickness exceeds

4 mm. During this operation it is not necessary to cut-

off the power or to remove the food from the freezer.

Do not use metal tools to remove frost so as to

avoid seriously damaging the appliance.

If a thick layer of ice is formed it will be necessary to

carry out complete defrosting as following:

set the thermostat knob to « O » position or unplug the

appliance from the mains socket;

wrap frozen food in several layers of newspaper and

place the food packages in a cool place;

Fig. 6

leave the door open. Introduce the plastic scraper in

the appropriate seating at the bottom center, as shown

in ﬁgure, place underneath a basin to collect the

defrost water.

When defrosting is completed dry the interior

thoroughly.

Keep the scraper for future use.

Turn the thermostat knob to the desired position or

replace the plug in the socket. After letting the

appliance to run for two or three hours on the quick-

D068

freeze setting, it is ready again for storing frozen

food.