Zanussi ZYNN8FW0 Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Congelador Zanussi ZYNN8FW0. Zanussi ZYNN8FW0 17 páginas.

Imprimir página
By clients in hotels, motels, bed and breakfast and other
–
residential type environments.
To avoid contamination of food respect the following
•
instructions:
do not open the door for long periods;
–
clean regularly surfaces that can come in contact with food
–
and accessible drainage systems;
WARNING: Keep ventilation openings, in the appliance
•
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to
•
accelerate the defrosting process, other than those
recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
•
WARNING: Do not use electrical appliances inside the food
•
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer.
Do not use water spray and steam to clean the appliance.
•
Clean the appliance with a moist soft cloth. Only use neutral
•
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
When the appliance is empty for long period, switch it off,
•
defrost, clean, dry and leave the door open to prevent mould
from developing within the appliance.
Do not store explosive substances such as aerosol cans with a
•
flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by the
•
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

INSTALLATION
WARNING! Only a qualified person
must install this appliance.
•
Remove all the packaging.
•
Do not install or use a damaged appliance.
•
Follow the installation instructions supplied with
the appliance.
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
•
Make sure the air can circulate around the
appliance.
•
At first installation or after reversing the door
wait at least 4 hours before connecting the
appliance to the power supply. This is to allow
the oil to flow back in the compressor.
3