Alean ABT-20 Manual de instalação - Página 4
Procurar online ou descarregar pdf Manual de instalação para Sensores de segurança Alean ABT-20. Alean ABT-20 8 páginas. Abt dual-beam active photoelectric intruder detector with digital frequency conversion
Imprimir página1.Remove the cover
2.Attach the paper stencil onto the location
where the equipment is to be mounted, and
drill the holes in the positions on its mark.
3.Put the cable through the hole for wiring.
4.Fix the main body onto the wall
5.Connect the cable to the wire terminal.
6.Put on the cover after adjusting
the response time of the beam.
Wiring hole
15mm
power supply
power supply
Installation of fixed bracket
1.Drill a hole on the bracket and
extend out the cable from it.
2.Remove the cover.
3.Fasten the base-plate to the bracket.
(Back-to-back installation guiding diagram)
Tamperproof
switch terminal
spare terminals
transmitter
alarm output
Wiring distance between transmitter and receiver
Tamperproof
switch terminal
receiver
DC13.8V
DC24V
300m
300m
400m
800m
700m
1400m
1000m
2000m