Zanussi ZHC960 Manual de Instruções - Página 6

Procurar online ou descarregar pdf Manual de Instruções para Campânula de ventilação Zanussi ZHC960. Zanussi ZHC960 13 páginas. Zanussi owners manual ventilation hood zhc960
Também para Zanussi ZHC960: Folheto de instruções (17 páginas)

Imprimir página

INSTALLATION

Wall marking:

• Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre

of the area in which the hood will be installed.

• Draw a horizontal line at 650 mm above the hob. Place bracket 7.2.1

1-2 mm from the ceiling or upper limit aligning the centre (notch) with the vertical reference line.

• Mark the wall at the centres of the holes in the bracket.

• Place bracket 7.2.1

7.2.1

7.2.1 on the wall as shown at X mm below the first bracket (X = height of the upper

7.2.1

chimney section supplied), aligning the centre (notch) with the vertical line.

• Mark the wall at the centres of the holes in the bracket.

• Mark a reference point as indicated at 116 mm from the vertical reference line and 323 mm above

the horizontal reference line.

• Repeat this operation on the other side.

• Drill ø 8 mm holes at all the centre points marked.

• Insert the wall plugs 11 11 11 11 11 in the holes.

• Fix the brackets using the 12a

• Insert the two screws 12a

6 mm between the wall and the head of the screw.

Wall drilling and bracket fixing

12a

12a (4,2 x 44,4) screws supplied.

12a

12a (4,2 x 44,4) supplied in the hood body fixing holes, leaving a gap of 5-

7.2.1 on the wall as shown about

7.2.1