Zanussi ZHT900X Instruções de funcionamento - Página 29

Procurar online ou descarregar pdf Instruções de funcionamento para Campânula de ventilação Zanussi ZHT900X. Zanussi ZHT900X 32 páginas.

Maintenance and Cleaning

1. Always disconnect from power supply before

cleaning.

2. Clean both exterior and interior of the hood

long lasting.

3. Fan safety grill can be detached for cleaning

by removing the screws with a screwdriver.

lt must be reinstalled after cleaned.

4. Oil dish on the grill can also be detached for

cleaning by turning the dish anti-clockwise.

5. The oil cup in the centre of the hood for holding

grease can be detached and cleaned regularly.

6. Make a habit to turn on the hood before using

stove to avoid high heat in the kitchen.

7. The two easy dismantle rotary knobs are set

bottom panel, please turn them anti-clockwise

to " - " then loosen safety screw to dismount the

bottom panel. It is easy to clean and repair.

To turn easy dismantle rotary knobs to " ∣ " and

fasten the safety screw to set bottom panel back.

8. Please must disconnect power before installing

light bulb. To refer Item 7 to dismount bottom

panel and then fasten/loosen light bulb with

socket.

Note：Only replace no more than 4W LED bulb

for ZHT800X and ZHT850X. And light bulb

MUST be equipped with international

safety mark.

Please contact distributors for the LED

strip for ZHT900X.

Remove

Assembly

Clockwise to install

Anti-clockwise to detach

Easy dismantle rotary knobs

Safety screw