Zanussi GC 9601 Instruções de utilização e cuidados - Página 8
Procurar online ou descarregar pdf Instruções de utilização e cuidados para Fogões Zanussi GC 9601. Zanussi GC 9601 27 páginas. Gas cooker
Também para Zanussi GC 9601: Instruções de utilização e cuidados (27 páginas), Manual de instruções de utilização (27 páginas), Instruções de utilização e cuidados (27 páginas)
Imprimir página
Operation
Safety cut off
The cooker is equipped with a safety cut
off device which totally interrupts the gas
supply of the worktop, oven and grill
burners. By lowering the worktop cover,
the gas supply is interrupted. To restore
gas supply, lift up the cover and depress
the black button situated at the SE left
of the worktop.
Safety cut-off switch
Do not tamper with or attempt to adjust
the safety cut-off switch. Any adjustment
must be made by a qualified engineer.
The switch is designed to prevent the hob
or oven being turned on when the lid is
closed.
Tampering with the switch may enable
the heat to be turned on with the glass
lid in the down position. The heat would
cause the glass lid to shatter which could
result in injury. Should you find the
switeh not functioning correctly, contact
your local authorised Zanussi Service
Centre.
Worktop burners
To light a worktop burner, turn the
relevant knob anticlockwise to maximum
(Fig. 1).
After opening the tap to maximum, push
button marked by a small electric spark.
As soon as the burner is lit, adjust the
flame as required.
Important: Put the pans on the burner
only after having lit it on.
To ensure maximum burner efficiency, it
is strongly recommended that you use
only pots and pans with a base fitting
the size of the burner used, so that
the flame will not spread beyond
the base of the vessel.
It is also advisable, as soon as a liquid
starts boiling, to turn down the flame so
8
that it will barely keep the liquid
simmering.
Important: Be very careful when frying
food in hot oil or fat as the overheated
splashes could easily flare up.
fig. 1
fig. 2