Zanussi ZCM 5262 Livro de instruções - Página 18
Procurar online ou descarregar pdf Livro de instruções para Fogões Zanussi ZCM 5262. Zanussi ZCM 5262 21 páginas. Electric gas cooker zcm 5262
Imprimir páginaAn intensive and prolonged use of the cooker
could necessitate a supplementary airing by
opening the window, or a more effective
ventilation by increasing the mechanical device
power, if there is.
Gas connection
Your cooker is delivered adjusted for the kind of
gas stated on the rating plate.
It might be necessary to pass to another kind of
gas, different to the one it is preset to. Under
these circumstances follow the instructions
bellow.
For best efficiency, lowest consumption and
a longer length of life of your cooker, the manifold
gas pressure has to respect the values shown in
table no. 2
If the appliance is supplied with Butane or
Propane gas check that from the pressure
regulator, the pressure for Butane is 28-30 mbar
and for Propane is 37 mbar.
Connection using a rigid pipe or a flexible
pipe (class 1).
1. For network gas:
Flexible, nonmetal pipe ( fig. 21)
•
Use a flexible rubber pipe non longer than
1,5 m and inner diameter of 15 mm mounted
with its holder
Make sure it is well inserted and fix it by
•
means of a collar.
Flexible pipe ( fig. 22)
•
Flexible pipe (mechanic connection) max
length 1.5 m;
•
We advice to use a flexible pipe, according to
the national rule in force, not shorter than 1
m, depending on the position of the tap;
•
Connect one end of the pipe to the blocking
tap, than, before placing the appliance
between the furniture, connect the other end
to the pipe extension, inserting a gasket.
Place the cooker checking that the loop
•
made by the flexible pipe develops in the
sanitary empty of the furniture.
Rigid pipe
Rigid pipe with screw nut
•
2. For cylinder butane propane gas ( fig. 23):
•
We advise you to use flexible pipe according
to the national rule in force of minimum 1 m;
this length is chosen depending on the
position of the connection to the gas supply;
•
For the old butane installations you can use a
flexible rubber pipe of max 1,5 m and 6 mm
diameter, mounted with the special butane
holder ;
Fix it well by means of a collar for each end.
•
Fitting
Connection
gas
Pipe
flexible
Necklace
fig. 21
Pipe
flexible
fig. 22
Fitting
Holder
butane
Flexible
rubber
Necklace
fig. 23
Pipe
flexible
17