Clarke Pioneer 205 Manual de Instruções de Operação e Manutenção - Página 7

Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Compressor de ar Clarke Pioneer 205. Clarke Pioneer 205 7 páginas.
Também para Clarke Pioneer 205: Instruções de funcionamento e manutenção (8 páginas)

Imprimir página

Clarke Pioneer 205 Manual de Instruções de Operação e Manutenção

SHUTTING DOWN THE COMPRESSOR

1. To shut off the compressor, simply press DOWN on the ON/OFF knob (See

Fig. 2) . Always use this knob to shut down the compressor. NEVER USE THE

MAINS SWITCH TO STOP MOTOR.

2. Close the air outlet tap and trigger the equipment (spraygun, air tool etc.)

to release air from the air hose before disconnecting the hose from the

machine.

3. Before transporting your compressor or when leaving overnight, expel all air

from the receiver by opening the drain valve (55).

MAINTENANCE

A. DAILY

1. Drain any condensate that may have

accumulated in the receiver daily by un-

screwing the drain valve underneath the

air receiver (figs. 2 and 5).

2. Check the oil level before you start and

top up if necessary - (use Clarke SAE 40

compressor oil).

B. PERIODICALLY

1. After the first 5 hours of running the compressor, check the cylinder head

bolts and motor housing screws and re-tighten if any have worked loose.

2. After the first 100 hours use replace the

oil completely using Clarke SAE 40

compressor oil. Thereafter replace the

oil completely after every 500 hours of

operation or every 6 months.

To empty the oil from the machine

remove the drain plug from the

crankcase cover (see figs. 2A and 6).

3. Every 50 hours (more frequently if used

in a dusty environment), clean the air

intake filter, by carefully prising off the

plastic filter from the air inlet, opening

the bottom flap, and withdrawing the

sponge element (see Fig 7).

Clean the sponge and the inner housing. If necessary, thesponge filter may

be gently washed in warm soapy water, rinsed and allowed to dry thoroughly

Fig. 5

Fig. 6

before refitting. Ensure that the outer

filter cover is then pushed back on to

the air inlet.

If any part of the filter is damaged

then you should obtain a

replacement.

4. Every 500 hours of operation or

every 6 months

clean all the external parts of

the compressor.

(This cleaning makes the cooling

process more efficient and prolongs

the life of the machine).

Check and clean the inlet and

outlet valves (consult your Clarke

dealer).

Examine the non-return valve and

replace the gasket if necessary (fig. 8)

5. In the event of an air leak follow the

procedure below:

Load compressor to maximum pressure.

Unplug the compressor.

With a brush and soapy water wet all screwed connections.

Any leaks will show through the formation of air bubbles.

WARNING

NEVER UNSCREW A CONNECTION WHILST THE AIR RECEIVER IS UNDER PRESSURE.

ALWAYS MAKE CERTAIN THAT THE TANK HAS FIRST BEEN EMPTIED.

Fig. 7

Parts List item No. 59

Fig. 8