Directed AS-RFK2800 Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Controlo remoto Directed AS-RFK2800. Directed AS-RFK2800 13 páginas. Two-way lcd remote system
Imprimir página
1-Way Companion Remote Control
LOCK: Locks the doors.
UNLOCK: Unlocks the
Using the 1-Way Companion Remote
The companion 1 way remote commands the system features as shown in the previous table, but
without the message display of the LCD remote. Parking light flashes is used to indicate that a
command has been received and activated as described in the "Basic Commands" and "Advanced
Commands" sections.
Accessing Commands
Similar to the LCD remote, Basic commands are performed when a command button is pressed
directly. To perform Advanced Commands press the
levels,
x4 in the table for example implies pressing
few seconds to indicate the level. Press the desired command button while the LED is flashing to
perform the command.
Lock Keypad
When On, the remote control buttons lock if more than 20 seconds lapses between button presses.
If a button is pressed when locked, a fault tone is emitted. To unlock the buttons; press the
button followed by the
Programming
To enter; hold the
the programming main menu has been accessed.
To exit; press and release the
emitted for each step back, the LED turns off when programming is exited.
Remote Features Menu
Press and release the
accessed and can be set. Press the buttons indicated below, 1 beep and flash turns the feature on,
2 beeps and flashes turns the feature off.
Autolock feature: Press
•
Remote Beeps: Press
•
User Guide
doors.
SHIFT: Allows access to
programming and modifies
operation of the other buttons.
button, the buttons unlock and tones play to confirm.
button for 8 seconds, the remote emits one long beep and turns the LED on,
button to go back and repeat to exit. 1 short and 1 long beep is
button, 2 LED flashes and beeps indicate the remote features menu is
to turn on/off.
to turn on/off.
TRUNK: Opens the
TRUNK.
START/STOP: Remote
starts or stops the engine.
button 1 to 4 times to access function
4 times. The LED flashes in groups for a
P.11