Alecto DBX-93 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Monitor de bebé Alecto DBX-93. Alecto DBX-93 13 páginas.

In case of any problems, always check first whether the DBX-93 does

work correctly on a different location. When suspecting a fault, always

verify the correct operation and settings of your babyphone as well.

No function:

- the adaptor of the baby unit is not connected to a wall socket or this

wall socket is not providing power, please check this

Weak or no reception:

- incorrect setting of channel or sub-channel (the baby unit and baby-

phone must be set to the same channel, with the same sub-channel)

- the distance between the transmitter and receiver is too large,

please reduce the distance

Noise:

- presence of other transmitter, please change the channel

- interference from other devices, turn these devices off (if possible)

High whistle:

- the transmitter is too close to the receiver of the volume of the

receiver is set too high, please increase the distance or decrease

the volume

If you cannot resolve the issue with the above suggestions, please

remove the batteries from the radio and the baby unit after several

minutes. If this still doesn't resolve the issue, please contact Alecto

customer service on the phone number 073 6411 355

The declaration of conformity is available on the

website WWW.ALECTO.INFO

TROUBLESHOOTING