Alecto SA-210 Manual - Página 12

Procurar online ou descarregar pdf Manual para Alarme de fumo Alecto SA-210. Alecto SA-210 19 páginas. Smoke detector for domestic use
Também para Alecto SA-210: Manual (19 páginas)

Imprimir página

INSTALLATION INFORMATION:

Attach the ceiling plate using the included plugs and screws to the ceiling on a

location of choice. Wall mounting is not recommended for smoke detection. Pull

the yellow plate out of the ceiling side of the unit. Then put the detector to the

ceiling plate and, twist clockwise to lock it in place. Perform a first test by holding

the test key for two seconds. Also see the paragraph: "Testing".

MPORTANT:

For optimal operation, we recommend mounting the smoke detector on the

ceiling. See also the installation instructions. If ceiling mounting is not possible,

we recommend that you place the smoke detector in the middle of a wall. The

installation location must be in the natural airflow of the room and free of side

walls or slope.

USING, TESTING AND MAINTENANCE:

Using:

The smoke detector works if the yellow plate has been removed and the SA-210

has been mounted to the ceiling. The LED underneath the test button will now

flash every 343 seconds. Once smoke is detected, the alarm will sound. Once the

smoke disappears, the smoke alarm will stop automatically

Hush function

The Hush function allows the user to decrease the smoke detectors sensitivity

during an alarm. By pressing the "HUSH/TEST" button the smoke detector is de-

creased for a period of 9 minutes. The red led flashes 1x every 9 seconds in Hush

mode. After 19 minutes the smoke detector resets to its default sensitivity. For

example, this can be used when the smoke detector gives alarm during cooking.

Time-out function:

The time-out function allows you to preventively lower the sensitivity of the smoke

detector. By pressing the "HUSH/TEST" button without an active alarm, you

reduce the smoke detectors sensitivity for 9 minutes. The LED lights up 1x every 9

seconds during Hush mode.

After 9 minutes the smoke detector resets to its default sensitivity. You can use

this mode for example when you know that a situation (for example: cooking) will

product smoke and there is no danger.

Test:

By pressing the "HUSH/TEST" button 1x, the alarm of the SA-210 will be checked.

Keep the "HUSH/TEST" pressed for a minimum of 5 seconds. If you immediately

hear 3 audio tones, the alarm is in excelent working condition. Check the alarm

every week. In alarm status the device generates 85dB(A) sound. Do not test the

device using candles, open fire, cigarettes etc.