Clarke 6500490 Manual de Instruções de Operação e Manutenção - Página 7
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Lixadeira Clarke 6500490. Clarke 6500490 13 páginas. Buffer/polisher
Imprimir página
ASSEMBLY
MOUNTING THE MACHINE
1. Bolt the buffer/polisher to a
workbench using the
securing holes shown.
• Check that all assembly
nuts and bolts are secure
before turning the
machine on.
• DO NOT block the
ventilation paths through
the base.
FITTING BUFFING/POLISHING PADS
1. Place the spacer over the shaft.
2. Place the polishing mop between the washers and secure with the retaining
nut, hand tight.
• The shaft threaded ends are handed LH and RH.
3. Tighten the nuts enough to grip without crushing the buffing/polishing pad.
NOTE: Wheel rotation, in use, will tighten the retaining nut.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7