Clarke CAT49 Instruções de funcionamento e manutenção - Página 4

Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Lixadeira Clarke CAT49. Clarke CAT49 13 páginas. Long bed sander

• Moving to another work area.

• Passing the tool to another person.

13. Never use the tool if it is defective or operating abnormally.

14. This tool should be serviced at regular intervals by qualified personnel.

15. Avoid damaging the tool by applying excessive force of any kind.

16. Always maintain the tool with care. Keep it clean for the best and safest

performance.

17. Quick change couplings should not be located at the tool. They add

weight and could fail due to vibration.

18. DO NOT force or misuse the tool. It will do a better and safer job at the rate

for which it was designed.

19. Do not remove any labels. Damaged labels should be replaced.

20. This tool vibrates with use. Vibration may be harmful to your hands or arms.

Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek

medical advice before resuming use.

SANDER-SPECIFIC SAFETY RULES

1. Avoid contact with the moving sanding pad and wear suitable gloves to

protect the hands.

2. Never run the tool unless the abrasive pad is applied to the workpiece.

3. Beware of potentially explosive atmospheres being caused by dust / fumes

resulting from sanding and used dust extraction systems where possible.

4. Always wear a face mask when using the sander as protection from

airbourne particles of sanded material. Avoid disturbing existing dust and

minimise the scattering of dust in the worplace environment. Take steps to

control the dust at the point of emission.

TRANSPORT & STORAGE

1. Never carry the tool by the air hose.

2. Never carry the tool with your finger on the trigger.

3. When not in use the tool must be disconnected from the air supply and

stored in a dry place out of the reach of children (preferably in a locked

cabinet).

4. Avoid storing the tool where the temperature is below 0

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]