Clarke 7120315 Manual de Instruções de Operação e Manutenção - Página 6
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Bomba de água Clarke 7120315. Clarke 7120315 17 páginas. Cpe water pump
Também para Clarke 7120315: Manual de Instruções de Operação e Manutenção (16 páginas)
Imprimir página
ELECTRICAL CONNECTIONS
WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS
THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE
MAINS SUPPLY.
Before switching the pump on, make sure that the
voltage of your electricity supply is the same as that
indicated on the rating plate or on the junction box
cover on top of the motor. This product is designed
to operate on 230VAC 50Hz. Connecting it to any
other power source may cause damage.
Installation should be carried out by a qualified
electrician, using I.E.E approved cable and fittings,
and in accordance with I.E.E. Regulations. However,
in the further interests of safety we would emphasise
the electrical hazard
.
WARNING: WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN/YELLOW = EARTH, BLUE = NEUTRAL, BROWN = LIVE.
• The BLUE wire must be
connected to the
terminal marked N or
coloured black.
• The BROWN wire must
be connected to the
terminal marked L or
coloured red.
• The YELLOW AND
GREEN wire must be
connected to the
terminal marked E
or
or coloured green.
We strongly recommend that this machine is connected to the mains supply
via a Residual Current Device (RCD).
If in any doubt, consult a qualified electrician. DO NOT attempt any
connections yourself.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Plug must be BS1363/A approved.
Earth
(Green and
Yellow)
Neutral
(Blue)
Ensure that the outer sheath of
the cable is firmly held by the clamp
6
Always fit
a 13 Amp
fuse.
Live
(Brown)