Directed Electronics 553S Manual do Proprietário - Página 14

Procurar online ou descarregar pdf Manual do Proprietário para Alarme para automóvel Directed Electronics 553S. Directed Electronics 553S 20 páginas. Directed electronics, inc. vehicle alarm owner's guide

Imprimir página

Table of Zones

The zone number is the number of LED flashes used by the system to iden-

tify that input. The standard input assignments are listed below, along with

spaces to write in any optional sensors or switches you have had installed.

If the Warn Away

response is triggered, the LED will not report it.

Zone (Number

of LED Flashes)

Description

Instant trigger—often

used for hood/trunk pin switches

Instant trigger—a heavier impact

detected by the Doubleguard

Shock Sensor

Door switch trigger

Instant trigger—for optional

sensors

Ignition trigger

Code Hopping

The receiver and transmitters each use a mathematical formula called an

algorithm to change their code each time the transmitter is used. This technol-

ogy has been developed to increase the security of the unit. The control unit

knows what the next codes should be. This helps to keep the transmitter "in

synch" with the control unit even if you use the remote control out of range of

the vehicle. However, if the transmitter has been pressed many times out of

range of the vehicle, or the battery has been removed, it may get out of synch

with the control unit and fail to operate the system. To re-synch the remote

control simply press the arm/disarm button of the remote control several times

within range of the vehicle. The alarm will automatically re-synch and respond

to the transmitters normally.

Dealer-Installed Options

™

XPLAINED