Clarke 7160042 Manual de Instruções de Operação e Manutenção - Página 6

Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Bomba de água Clarke 7160042. Clarke 7160042 13 páginas. 12&24v diesel fuel transfer pumps

Imprimir página

CONNECTION & OPERATION

WARNING: DO NOT USE WITH PETROL OR ANY OTHER HIGHLY FLAMMABLE

LIQUID TO DUE TO THE POSSIBILITY OF SPARKING TAKING PLACE AND

CAUSING FIRE.

1. Fit the carrying handle to the

pump with the hex screw & washer

provided.

2. If required, the pump can be

installed in any horizontal

mounting position and mounted to

a flat surface using screws of

adequate size (not supplied)

through the mounting holes in the

base.

• The pump should not be installed at more than 6m above the fuel

supply.

3. Before connecting the pump, remove the travel plugs from the inlet/outlet

ports.

4. If not already fitted, screw the inlet filter to the plastic suction hose.

5. Screw in either:

• A) the inlet and outlet hoses

supplied or

• B) the inlet adaptors for use with

19 mm hoses

NOTE: The transparent suction hose is

connected to the side of the

pump marked "IN" and the

delivery hose to the side

marked "OUT" on the pump

casting.

• The hose and connections need to be completely air tight,

otherwise air will be drawn in and reduce the flow. If required use

PTFE tape.

6. Before connecting the delivery hose FOR THE FIRST TIME, partially fill the

pump body with fuel to facilitate priming. Ensure the hoses and tank are

free from contamination.

7. Insert the transparent suction hose & filter into the diesel fuel container.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]