Alemite 8202 Manual de utilização, instalação, manutenção e reparação - Página 6
Procurar online ou descarregar pdf Manual de utilização, instalação, manutenção e reparação para Bomba de água Alemite 8202. Alemite 8202 10 páginas. 1/2" plastic pump
Imprimir páginaAir
Filter
Supply
Regulator
Shut Off
Shut Off
Valve
Valve
Fluid
Suction
Suggested Installation
A typical installation showing all the components
that are recommended in a system, including valves,
pressure gauges, air regulators, filters, and surge
suppressors.
Pump Datum
Flooded Suction Installation
A flooded suction installation has the pump datum
line below the fluid level. IMPORTANT: in flooded
suction installations the pressure at the fluid inlet of
the pump should never exceed 69 kPa (10 psi).
Page 6
TYPICAL INSTALLATIONS
Surge
Suppresser
Pressure
Gauge
Flexible
Shut Off
Connection
Valve
Fluid
Discharge
Union or
Pipe Flange
Connection
Air Exhaust
Muffler
Mounting
Bolts
Air Inlet
Suggested Submerged Installation
In a submerged application , the air exhaust port of
the pump must be ported above the fluid line. Be
certain that the fluid being pumped is compatible
with the materials on both the airside and the wetted
side of the pump before the pump is submerged.
Pump Datum
Suction Lift Installation
In suction lift installations the pump datum is above
the fluid line. IMPORTANT: each pump has different
lift capabilities. Be sure to verify the lift capability of
a particular pump before installing it into a system.
Fluid Discharge
Air Exhaust