Clarke LEP1A 7260060 Manual de Instruções de Operação e Manutenção - Página 8
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Bomba de água Clarke LEP1A 7260060. Clarke LEP1A 7260060 12 páginas. Clean water pump
Imprimir página
PREPARATION
CONNECTING THE MULTI HOSE ADAPTOR
DISCONNECTED THE PUMP FROM THE MAINS POWER SUPPLY BEFORE
1
Fit the elbow adaptor to the pump outlet
as shown in the diagram opposite.
2
Screw the multi hose adaptor onto the
elbow,
•
The multi hose adaptor is capable of
accepting 1" and 1¼" hoses and a 1"
BSB Thread.
3
Simply cut the multi hose connector to the
required size and attach a suitable hose
using with a worm drive clip.
•
For maximum efficiency, we strongly
recommend that you connect a 1¼"
diameter hose to the multi hose
adapter,
•
Alternatively, you may remove the multi
adapter altogether, and screw on a 1¼"
BSP hose adapter
The pump is completely submersible, and should be placed in a vertical position, on a
solid flat surface, Placing the pump on a couple of house bricks if required.
SUITABLE HOSES, and SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE
WARNING!
CONNECTING THE MULTI HOSE ADAPTOR
AVAILABLE FROM YOUR CLARKE DEALER
Elbow
1" Hose
1" BSP
1¼" Hose
8