Directed Electronics PS-4461TWE-FM Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Arrancador remoto Directed Electronics PS-4461TWE-FM. Directed Electronics PS-4461TWE-FM 20 páginas. Two-way 6-button lcd automatic/manual transmission remote starter

Imprimir página

F Button Function

Function Button

programming

Remote Starting Your Vehicle

Setting Your Vehicle Into Ready Mode

If your vehicle has a manual transmission you must read the following indications. The unit must

first be set to Ready Mode in order to start the vehicle by remote. If the unit is not set to Ready

Mode, it cannot remote start the vehicle. Please note that Ready Mode can be enabled by the

remote or the handbrake, depending on the option that was selected by your installer. Therefore,

you must follow the appropriate procedure between the two described below in order to set your

vehicle into Ready Mode.

Once the system is set to Ready Mode, the vehicle can be remote started and stopped at any time.

The system will exit Ready Mode if a door, the hood or the trunk is opened, if the brake pedal is

pressed, if the parking brake is disengaged or if the ignition key is turned to the IGNITION ON

(RUN) position.

To set the system to Ready Mode:

If Ready Mode is enabled by remote

1. Ensure that all the doors, hood and trunk are closed. Make sure that the gear selector is in the

neutral position.

2. With the engine already running, apply the

parking brake once and release the brake

pedal.

3. Within 20 sec. of engaging the parking

brake, press and hold

the transmitter.

The parking lights will flash 3 times quickly

and remain lit.

4. Remove the key: the engine will continue running.

5. Exit the vehicle and close all doors, hood and trunk.

6. Press for approx. 1 second either:

to lock the doors and shut down the engine;

to unlock the doors and shut down the engine;

to shut down the engine without affecting the doors.

7. The

icon will appear on your screen.

Remote starting

Press the

button for approximately 1 second and release.

The remote will beep once and the LCD will display "START".

The remote will confirm the remote starter's activation by beeping 3 times.

User Guide

FBPRO

Function Button Programming

1 2 3 M

Level 1, level 2, level 3, MENU

2 3 1 M

Level 2, level 3, level 1, MENU

3 1 2 M

Level 3, level 1, level 2, MENU

2 1 3 M

Level 2, level 1, level 3, MENU

M 1 2 3

MENU, level 1, level 2, Level 3

If Ready Mode is enabled by handbrake

2. With the engine already running, apply the

parking brake twice within 10sec.

Make sure to release the brake pedal.

The parking lights will flash 3 times quickly

and remain lit.

Skip to step 4.

P.9