Alemite 3640 Manual de serviço - Página 10

Procurar online ou descarregar pdf Manual de serviço para Unidade de controlo Alemite 3640. Alemite 3640 14 páginas. Electronic preset metered control valve

Imprimir página

1. Meter Programming

SER 3640

Overhaul

NOTE: Refer to Figure 2-A and 2-B for

component identification on the major com-

ponents of the valve assembly.

Prior to performing any maintenance procedure, the

following safety precautions must be observed. Personal

injury may occur.

WARNING

Do not use halogenated hydrocarbon sol-

vents such as methylene chloride or 1,1,1 trichlo-

roethane in this valve assembly. An explosion can

result within an enclosed device capable of con-

taining pressure when aluminum and/or zinc-

plated parts come in contact with halogenated

hydrocarbon solvents.

Release all pressure within the system prior to

performing any overhaul procedure.

• Disconnect the air supply line from the pump

motor.

• Into an appropriate container, operate the

control valve to discharge remaining pressure

within the system.

Never point a control valve at any portion of your

body or another person. Accidental discharge of

pressure and/or material can result in personal

injury.

Read each step of the instructions carefully. Make

sure a proper understanding is achieved before

proceeding.

Disassembly

Extensions and Nozzles

1. Unscrew the extension assembly from Control Valve

Assembly (11).

2. Separate the components of the extension assembly.

Non-Drip Nozzle (Automatic w/ Manual Lock)

1. Unscrew Nozzle (49) from Angle Body (54).

2. Remove O-Ring (50) from the Nozzle.

3. Remove Stem (52) from the Nozzle.

Revision (10-04)

Electronic Preset Metered Control Valve

4. Remove V-Block (51) and Spring (53) from the Stem.

5. Unscrew Screw Assembly (57) from the Angle Body.

6. Remove Washer (56) from the Screw Assembly.

7. Remove Gasket (55) from the Angle Body.

Item

Part No.

No.

Nozzle

O-Ring, 1/2 " ID x 5/8 " OD

V-Block

Stem

Spring

Body, Angle

Gasket

Washer

Screw Assembly

Legend:

Part numbers left blank are not available separately

designates a repair kit item

Repair Kit

Part No.

Kit Symbol

393518

Figure 8 Nozzle Assembly 318400-2 - Exploded View

Description

Notes

Description

Kit, Repair

Alemite Corporation

Qty