Directed Electronics Viper Manual do Proprietário - Página 20

Procurar online ou descarregar pdf Manual do Proprietário para Arrancador remoto Directed Electronics Viper. Directed Electronics Viper 20 páginas. Security and remote start

Imprimir página

Directed Electronics Viper Manual do Proprietário

and CHARGE is displayed on the LCD. Once the battery has accu-

mulated enough charge for functionality, the LCD icons initialize with

a beep sound, the battery status outline stops flashing and the remote

becomes operational while still displaying CHARGE.

➤ Low battery indicator

When the batteries are low on the 2-way remote it will emit two groups

of beeps, the battery icon will flash and the text will display low batt,

the alarm then emits an additional chirp upon disarming of the alarm to

let you know its time to change the battery. When the battery is low on

the 1-way remote, the remote responds the same, but without the icons

available on the two way remote.

Note:

The Arm/Disarm chirps should be programmed ON for the

Sat mode,

alarm to emit any additional chirps during disarm. Ask your autho-

bank selector

rized dealer if you have any questions.

➤ Battery Replacement

Control

Slide the door up to expose the battery beneath the holder. Remove the

expired battery. Place the new battery into the remote control. When

Toggles

Scan mode

power is returned the remote control is ready for use.

The temperature range over which

Warning!

the battery can be charged is 0ºC TO 45ºC

(32ºF TO 113ºF). Charging the battery at

temperatures outside this range may cause

severe damage to the battery or reduce bat-

tery life expectancy.

Bank and

present

indicator

REW

Tune mode

indicator

11:53