CTEK 1081 Manual do utilizador

Procurar online ou descarregar pdf Manual do utilizador para Carregador de bateria CTEK 1081. CTEK 1081 6 páginas.

MANUAL

CONGRATULATIONS

To the purchase of your new professional switch mode battery charger. This charger is

included in a series of professional chargers from CTEK SWEDEN AB and represents the

latest technology in battery charging. The LITHIUM XS charger model is designed for

Lithium-ion batteries using LiFePO

technology only. Please check with the battery manufac-

turer for details. Do not use the LITHIUM XS charger for any other battery technology.

SUPPLY PLUG*

CTEK COMFORT CONNECT

CHARGE CABLE

CTEK COMFORT CONNECT – eyelet M6

* Supply plugs may differ to suit your wall socket.

MAINS CABLE

CTEK COMFORT CONNECT – clamp

HOW TO CHARGE

1. Connect the charger to the battery.

2. Connect the charger to the wall socket.

3. Follow the 8-step display through the charging process.

The battery is ready to start the engine when STEP 3 is lit.

The battery is fully charged when STEP 7 is lit.

4. Stop charging at any time by disconnecting the mains cable from the wall socket.

READY TO USE

RESET-BUTTON

ERROR LAMP

RESET

POWER LAMP

BATTERIES WITH "UNDER VOLTAGE PROTECTION"

Some Lithium-ion batteries have an on-board UVP (under voltage protection) that

disconnects the battery to avoid it becoming too deeply discharged. This prohibits the

CTEK charger from detecting that there's a battery connected. To bypass this, the bat-

tery charger needs to open the UVP. By pressing the RESET-button for 10 seconds, the

charger opens the UVP. During this process, the charging STEP 7 is lit. Once the UVP has

been opened and the battery is ready to be charged, the charger automatically starts the

charging cycle.

FULLY CHARGED

EN • 3

LiF