Acorn TERRAZZO-WARE Series Procedimentos recomendados de limpeza e manutenção - Página 3

Procurar online ou descarregar pdf Procedimentos recomendados de limpeza e manutenção para Produto de canalização Acorn TERRAZZO-WARE Series. Acorn TERRAZZO-WARE Series 3 páginas. Shower bases

Imprimir página

I N S T A L L A T I O N

ACORN ENGINEERING

COMPANY

RECOMMENDED PROCEDURE.

INSTALLATION INSTRUCTIONS:

1. Cut drain pipe to extend 1-3/8" into

drain body. Drain pipe should be even

with top of gasket when installation is

completed. Position Shower Base over

2" waste pipe making sure that pipe is

centered in drain body.

2. Lubricate gasket with soap solution and

stretch over 2" pipe with letters facing up.

3. Push gasket as far as possible into joint.

4. Using a hammer and caulking tool or

1/4" X 3/4" X 6" piece of wood instead

of a caulking tool, work around the

gasket with a series of blows and

gradually drive gasket into drain body

until it bottoms. Drain pipe should be

even with the top of gasket.

5. Test connection before covering or

concealing. To test: plug 2" drain and fill

receptor with water. Check for leaks.

Verify proper drainage. This must be

done before finishing walls.

WARNING!

2 5

MODELS WITH TILING FLANGE OPTIONS:

A. Do not let rough wall material overlap

flange.

B. Do not attach flange to building wall.

C. Let finished wall (tile, etc.) overlap and

rest on shoulder.

TERRAZZO-WARE

800-488-8999 or 626-336-4561

FAX 626-961-2200

P.O. BOX 3527 • CITY OF INDUSTRY, CA 91744-0527 (U.S.A.)

I N S T R U C T I O N S

Shower Bases

2" WASTE PIPE

(BY OTHERS)

#2 & #3

ALTERNATE PROCEDURE

A. TAMP OAKUM TO 5/8" DEPTH

B. POUR MOLTEN LEAD.

C. TAMP LEAD CAREFULLY.

NOTE: 2" WASTE

PIPE AND "P" TRAP

BY OTHERS.

DO NOT ATTACH

LATH,

FLANGE TO WALL

PLASTER

BOARD, ETC.

Shower Bases

1-3/8"

FINISHED

FLOOR

OPTIONAL -KDG or

GASKET BY OTHERS

TILE, ETC.

3030-737-000 Rev. 03/04/13

BASE

CAULKING