Directed Video RVM560 Manual de instalação do proprietário - Página 10

Procurar online ou descarregar pdf Manual de instalação do proprietário para Monitor Directed Video RVM560. Directed Video RVM560 16 páginas. Directed video lcd video monitor owner's guide

Imprimir página

SECURITY (ESP/ESP2 ONLY)

NOTE: This menu contains

selections that have addi-

tional settings.

SETUP (MCB1000 ONLY)

NOTE: This menu contains

selections that have additional

settings. This menu is used for

initial system setup only.

IMPORTANT!

Any changes in the following menus must be written into the MCB1000 and ESP/ESP2

software. Before the menu is exited the "write to system" procedure must be completed.

SYSTEM SETTINGS MENU

SELECTION

PASSIVE/ACTIVE ARMING

(passive)

CHIRPS ON/OFF

IGNITION LOCK ON/OFF

IGNITION UNLOCK ON/OFF

PASSIVE/ACTIVE LOCKING

ESP/ESP2 programming and zone information.

TRIGGER INFORMATION - Displays ESP/ESP2 zone

information. (Always displays the last zone triggered

only.) See the Assign Trigger Names menu.

SYSTEM SETTINGS - Displays the System Settings

menu. See the System Settings menu.

Change hardware settings and rename zones.

HARDWARE OPTIONS - Displays the Hardware

Options menu. See the Hardware Options menu.

ASSIGN SOURCE NAMES - Displays the Source

Names menu. See the Source Names menu for a

list of names.

ASSIGN TRIGGER NAMES - Displays the Trigger

Names menu. See the Trigger Names menu.

DESCRIPTION AND OPERATION

Program the ESP/ESP2 security system to arm by itself

or if its remote must be used for arming (active). For a

full description of this setting refer to your ESP/ESP2

owner's guide.

This feature will turn the arming and disarming chirps

on/off. For a full description of this setting refer to the

ESP/ESP2 owner's guide.

When turned on, the doors will lock three seconds after

the ignition is turned on. For a full description of this

setting refer to the ESP/ESP2 owner's guide.

When turned on, the doors will unlock when the ignition

is turned off. For a full description of this setting refer

to the ESP/ESP2 owner's guide.

This feature controls whether the doors will lock when

the ESP/ESP2 security system passively arms itself. For a

full description of this setting refer to your ESP/ESP2

owner's guide.