Clarke CMSF110 Instruções de funcionamento e manutenção - Página 13
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Serra Clarke CMSF110. Clarke CMSF110 20 páginas. Multi purpose circular saw
Imprimir página
MAINTENANCE
For any problems requiring the dismantling and overhaul of the saw, contact
your CLARKE International Service Department on 020-8988-7400.
Always inspect the saw before use and ensure it is in top condition.
Ensure all air vents are clear of debris, (use compressed air to clean the
machine where possible). Ensure that the lower guard can spring freely back
to its closed position and clean out any debris lodged behind it.
Check the power cable to ensure it is sound and free from cracks, bare wires
etc. Avoid using solvents when cleaning plastic parts, most plastics are
susceptible to damage from various types of commercial solvents.
Check the operation of the lower guard, ensuring it springs freely to and fro.
All bearings etc, in this tool are lubricated with a sufficient amount of high
grade lubricant for the tools lifetime under normal operating conditions,
therefore no further lubrication is required.
STORAGE
Store in a clean, dry environment protected from the weather.
TROUBLESHOOTING
SAW OVERHEATS
Clean the motor ventilation holes, and blow out with compressed air or clean
with a dry cloth.
Overloading the machine will also cause overheating. Do not use for heavy
duty work and do not apply excessive pressure.
EXCESSIVE SPARKING OCCURS
This indicates worn brushes which can be easily replaced by your CLARKE
dealer.
SAW DOES NOT OPERATE WHEN SWITCHED ON
Check to ensure the fuse is sound and replace if necessary. If the fuse is
sound or blows repeatedly, consult your CLARKE dealer.
13