Clarke CPS160 Manual de Instruções de Operação e Manutenção - Página 14
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Serra Clarke CPS160. Clarke CPS160 17 páginas. 160 mm plunge saw
Imprimir página
5. Remove the outer flange and
then the saw blade.
6. Insert the new blade and replace
the flange.
7. Tighten the saw blade locking
screw whilst holding down the
shaft lock.
8. Release the shaft lock and set the
plunge saw depth to its original
position.
9. Make sure that all adjustment keys are removed before use.
ADJUSTING THE RIVING KNIFE
1. Slide the plunge release button
upward and set the blade depth
to 25 mm.
• At this depth you should be
able to see the riving knife
adjustment screw through the
hole in the blade guard.
2. Insert the hex key supplied and
loosen the riving knife adjustment
screw.
3. Adjust the riving knife so that is it equally spaced around the blade.
4. Tighten the riving knife adjustment screw and set the plunge saw depth to
its original position.
5. Make sure that the hex key is removed before use.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
14