Clarke WOODWORKER CTS800B Instruções de funcionamento e manutenção - Página 6
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Serra Clarke WOODWORKER CTS800B. Clarke WOODWORKER CTS800B 15 páginas. 8” 200mm table saw
Imprimir página
ELECTRICAL CONNECTIONS
Connect the mains lead to a standard 230 volt (50Hz) electrical supply via a 13
amp BS1363 plug fitted with a 5 amp fuse.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
As the colours of the flexible cord of this appliance may not correspond with the
coloured markings identifying terminals in your plug, proceed as follows:
•
Connect GREEN & YELLOW cord to terminal marked with a letter "E" or Earth
symbol "
", or coloured GREEN or GREEN & YELLOW.
•
Connect BROWN cord to terminal marked letter "L" or coloured RED.
•
Connect BLUE cord to plug marked letter "N" or coloured BLACK.
FUSE RATING
The fuse for the plug in this appliance must be rated at 5 amps.
We recommend that this machine is connected to the mains supply via a Residual
Current Device (RCD).
EXTENSION CABLES
If an extension cable is used always ensure that it is fully unwound. The maximum
extension length is 25M, and the wire size in the cables must be at least 1.5mm in
diameter. As a general rule the extension cable must be thicker than the cable
supplied with the Table Saw. If longer extensions are required please seek advice
from a qualified electrician.
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.
DO NOT ATTEMPT ANY ELECTRICAL REPAIRS YOURSELF.
Green & Yellow
Blue
Brown
-
Earth
-
Neutral
-
Live
6