Clarke DEVIL 9000PTC Manual de Instruções de Operação e Manutenção - Página 10
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Aquecedor Clarke DEVIL 9000PTC. Clarke DEVIL 9000PTC 17 páginas. 400v electric fan heater
Também para Clarke DEVIL 9000PTC: Manual de Instruções de Operação e Manutenção (13 páginas)
Imprimir página
TROUBLESHOOTING
Problem
Heater does not
operate,
although
plugged in with
the switch and
thermostat
switched on.
Heating element
glowing hot.
The unit has failed
to heat up so only
the air fan has
operated.
Abnormal noise.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Possible Cause
Plug is loose/bad
connection.
Fuse blown or
circuit breaker
trips.
No power at
socket outlet
Input voltage too
high.
Air inlet grille is
blocked.
Control switch not
set at a "HEATING"
level.
Thermostat has
tripped.
Heater is not level. Stand heater on a level surface.
Remedy
Pull the plug out & check all
connections (cable/plug and socket).
Replace if necessary and investigate
cause. If fuse blows repeatedly, consult
your CLARKE dealer.
Insert the plug in a suitable socket.
Use a power supply in accordance
with the rating on the label.
Ensure the heater is kept away from
any objects which could cover the air
inlet or be drawn into it.
Turn switch to a heating level.
Turn the thermostat and listen. If there is
no CLICK and the thermostat is not
damaged, the heater will
automatically switch ON when it has
cooled down.
10