Clarke CAT114 Manual de Instruções de Operação e Manutenção - Página 7
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Ferramentas Clarke CAT114. Clarke CAT114 17 páginas. Air hammer with chisel set
Imprimir página
BEFORE USE
Ensure the compressor is turned off.
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF
COMPRESSORS AND COMPRESSED AIR SUPPLY.
1. Remove the travel plug from the
bottom of the tool as shown.
2. Pour 2-3 drops of CLARKE airline oil
into the air inlet. This should be
done regardless of whether or not
a lubricated air supply is to be
used.
3. Connect a suitable hose to the
tool as shown.
• Use the adapter supplied if
required.
4. Connect the other end of the hose
to the compressor.
You can fit a whip hose with a quick fit
coupling if required (available from
your Clarke dealer.)
FITTING THE CHISEL
1. First remove the retaining spring
from the nose by unscrewing it.
• Use the inboard lug to gain
purchase.
2. Insert the end of the chisel into the
air hammer.
3. Replace the retaining spring, as
shown.
• Use the lugs to tighten.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7