Clarke CHT637 Instruções de funcionamento e manutenção - Página 4
Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Ferramentas Clarke CHT637. Clarke CHT637 16 páginas. Air operated clutch & brake bleeding kit
Imprimir página
GENERAL SAFETY PRECAUTIONS
Warning: As with all equipment, there are certain hazards involved
with its operation and use. Exercising caution will reduce the risk
of personal injury.
WORK AREA
1. Keep the work area clean and well lit. Floors should always be kept clear.
Cluttered or dark areas invite accidents.
2. Keep children and bystanders away while operating machines and using
tools. Distractions can cause loss of control.
PERSONAL SAFETY
1. ALWAYS stay alert, watch what you are doing and use common sense
when operating this product. Do not use the product while you are tired or
under the influence of medication, drugs or alcohol. A moment of
inattention can result in personal injury.
2. Do not over-reach. Keep your proper footing and balance at all times
when positioning the product.
3. Brake fluid is highly corrosive. It is advisable to always wear gloves and
approved safety glasses at all times and always prevent contact with
painted surfaces.
4. ALWAYS store this product out of reach of children and do not allow
persons unfamiliar with these instructions to operate it.
5. ALWAYS thoroughly familiarise yourself with this product & its operation,
and always read and understand the instructions and warnings in this
manual before using the equipment.
GENERAL EQUIPMENT USE AND CARE
1. ALWAYS maintain the product with care and keep it clean for best / safest
performance.
2. NEVER use this product if any part is damaged. Have it inspected and
repaired by your local Clarke dealer.
3. NEVER modify or tamper with this product in any way. Use it only for the
purpose for which it is designed.
4. NEVER use the unit to extract or store flammable liquids, toxic or corrosive
chemicals or hold any fluids at very high temperatures
5. ALWAYS consult and follow the vehicle manufacturers recommended
procedures when working on any hydraulic system.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
4