Clarke X-PRO CAT170 Instruções de funcionamento e manutenção - Página 3

Procurar online ou descarregar pdf Instruções de funcionamento e manutenção para Ferramentas Clarke X-PRO CAT170. Clarke X-PRO CAT170 13 páginas.

GENERAL SAFETY RULES

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.

1. Keep the work area clean and tidy.

2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair

out of the way.

3. Keep children and visitors away - Do not let children handle the tool.

4. Do not operate the tool where there are flammable liquids or gases.

5. Stay alert and use common sense - do not operate the tool when you are

tired or under the influence of alcohol, drugs or medication.

6. Always wear eye protectors when using the tool. Eye protectors must

provide protection from flying particles from the front and the side. Ear

protectors should also be worn.

7. Do not overreach - Keep proper footing and balance at all times.

USE OF POWER TOOLS

1. Never use oxygen, carbon dioxide, combustible gasses or any type of

bottled gas as a source of power for this tool.

2. Do not connect the air supply hose with your finger on the trigger.

3. Do not exceed the maximum pressure for the tool of 90 psi / 6.2 bar.

4. Keep the air supply hose away from heat, oil and sharp edges.

5. Do not fit the tool to any stand or clamping device that may damage it.

6. Check hoses for leaks or worn condition before use, and ensure that all

connections are secure.

7. Do not use the tool for any purpose than that described in this manual.

8. Do not carry out any alterations or modifications to the tool.

9. Always disconnect from the air supply when:

• Performing any maintenance.

• The tool is not in use.

• The tool will be left unattended.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]