3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys Manual de início rápido - Página 9

Procurar online ou descarregar pdf Manual de início rápido para Porta de entrada 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys. 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys 15 páginas. Wireless intrusion prevention system
Também para 3Com 3CRWX5850GS - AirProtect Sentry 5850 Wireless Intrusion Prevention Sys: Ficha de dados (4 páginas)

Imprimir página

EGULATORY

The 3Com AirProtect Sentry, Model WL-548 (3CRWX5850GS) must be installed and used in strict accordance

with the manufacturer's instructions as described in the user documentation that comes with the product.

This product contains encryption. It is unlawful to export out of the U.S. without obtaining a U.S. Export

License.

This product does not contain any user serviceable components. Any unauthorized product changes or

modifications will invalidate 3Com's warranty and all applicable regulatory certifications and approvals.

Only antennas specified for your region by 3Com can be used with this product. The use of external amplifiers or

non-3Com antennas may invalidate regulatory certifications and approvals.

This product can only be used with the supplied antennas.

CAUTION: E

XPOSURE TO

This device generates and radiates radio-frequency energy. In order to comply with FCC radio-frequency

exposure guidelines for an uncontrolled environment, this equipment must be installed and operated while

maintaining a minimum body to antenna distance of 20 cm (approximately 8 in.).

The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not

emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable

from Health Canada's website www.hc-sc.gc.ca/rpb.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users

must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be

installed and operated with minimum distance 20 cm between the radiator and your body.

This product must maintain a minimum body to antenna distance of 20 cm. Under these conditions this product

will meet the Basic Restriction limits of 1999/519/EC [Council Recommendation of 12 July 1999 on the limitation

of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz)].

US — R

ADIO

REQUENCY

This device must not be co-located or operated in conjunction with any other antenna or transmitter.

This device is for indoor use only when using channels 36, 40, 44 or 48 in the 5.15 to 5.25 GHz frequency range.

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These

radar stations can cause interference with and/or damage this device.

FCC N

OTICE

To comply with FCC Part 15 rules in the United States, the system must be professionally installed to ensure

compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to

ensure that only certified systems are deployed in the United States. The use of the system in any other

combination (such as co-located antennas transmitting the same information) is expressly forbidden in

accordance with FCC rules CFR47 Part 15.204.

USA—F

EDERAL

OMMUNICATIONS

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet prepared by the Federal Communications Commission helpful: The

Interference Handbook. This booklet is available from the U.S. Government Printing Office, Washington, DC

NFORMATION

ADIO

REQUENCY

EQUIREMENTS

OMMISSION

ADIATION

(FCC) EMC C

OMPLIANCE