CTM LYNG 5648534 Instruções de instalação e de utilização
Procurar online ou descarregar pdf Instruções de instalação e de utilização para Temporizador CTM LYNG 5648534. CTM LYNG 5648534 2 páginas. Wireless timer
Imprimir página
INSTALLATION
NB: It is best to carry out pairing and test the timer before
installation. Mount the switch directly on the wall or on the
outside of a standard wall box.
TIP: Program all the units in a system before mounting. This will
make it easier to test the equipment.
DIPSW
SW4
OFF
LED3
Back of
Factory settings:
timer
1=ON 2=ON 3=OFF 4=OFF
DIP 1
DIP 2
DIP 3*
DIP 4**
ON
ON
ON:
ON:
Set time of choice
OFF
ON
Lock function
NB! Must be
ON
OFF
OFF:
OFF when in
Normal use
operation.
OFF
OFF
*DIP 3 – Master switch function/Lock function
If DIP3=ON, only this switch panel can turn paired products back on if
they have been turned off with this switch panel.
Example: A school kitchen wants to use a timer for all its cookers. All the cookers
also have a cooker guard. The teacher starts all the cookers by pressing the switch
panel (DIP3=ON) with the time set to 1 hour. All the cookers now have power for
1 hour. If the cooker guard cuts the power, the pupils can press the cooker guard
and get power back. After 1 hour, the switch panel turns all the cooker guard
sockets off. Now no pupil can turn the cooker on by pressing the cooker guard.
**DIP 4 – Time of choice
DIP1 and 2 must be OFF.
To change the time of choice, set DIP4=ON. Briefly pressing SW4 once
changes to the next time. The sensor acknowledges with the number
of beeps and flashes (LED3) for the time selected.
NB: Set DIP4 back to OFF once the desired time has been selected.
SOUND
TIME
SOUND
TIME
1 beep
5 min.
6 beeps
90 min.
2 beeps
15 min.
7 beeps
2 hours
3 beeps
20 min.
8 beeps
4 hours
4 beeps
45 min.
9 beeps
6 hours
5 beeps
60 min.
10 beeps
10 hours
5
The system owner/user must familiarise themselves with
the accompanying Installation and User Instructions at
installation, and is under an obligation to test that installed
equipment shuts off the water supply as required in the
Norwegian Insurance Approval Board (FG) test.
Function testing must be performed at least twice a year in
ON
accordance with the Installation and User Instructions for
Dimensions:
Conforms to RS16
Battery:
CR2032
Time
30 minutes
RF:
1 hour
868.100 MHz +5 dBm
4 hours
Compatible with "v2"
Time of choice**
equipment, see page 2
CTM Lyng AS is Norway's leading manufacturer
and supplier of security products for the home,
assistive technology, energy efficiency, and light
and heating control for all building types under the
mKomfy
, mTouch
®
We distribute our products through wholesalers.
We offer everything from product development to
production and distribution.
Our production facility in Vanvikan is equipped with some
of the most advanced machinery in Europe.
Verkstedvegen 19, 7125 Vanvikan, Norway
Email: [email protected]
For more information, visit us at
Thank you for choosing a product from CTM Lyng AS
ANNUAL END USER TEST
sensors and switch panels.
Technical data
IP Code:
20
Battery life:
5 years in
normal use
RF range:
30 metres
, Microsafe
and Centrol
brands.
®
®
®
Tel: +47 72 83 16 11
www.ctmlyng.com
6
Installation and User instructions
Timer, wireless
No. 5648534 / 6251645
1