clarsen H430 Instruções de utilização - Página 3
Procurar online ou descarregar pdf Instruções de utilização para Máquina de lavar roupa clarsen H430. clarsen H430 4 páginas. Collapsible washing machine
Imprimir página
Collapsible Washing Machine
Please read and retain these instructions for future reference
User Instructions
Remove the machine from the box and position it on level ground.
Open the cover and take out the inlet hose, outlet hose and instructions. Stretch the folded body
upward.
Install the outlet hose. Make sure the outlet pipe faces upwards when running. There is a clip to hold it
in place.
Connect the water inlet hose to a water tap and the other end into the water inlet hole. Do not connect
hot water!
Put in clothes and soap, please do not put more than the rated weight 3.5kg.
Pour water into the tub. Water cannot be over the highest level marker inside the body.
Insert the plug into the socket.
Close the cover and rotate the knob to start.
After washing
Remove the plug from the socket.
When finished washing unclip outlet from the top and release the water into the sink or a bucket.
Remove debris from the tub, dry water and open the lid to discharge moisture.
Ensure washing machine has completely dried out before storing it.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that are ASTA
or BSI approved to BS1362 and with a rated current of 13-amps should be used. If there is a fuse cover fitted,
this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the plug must not be
used. Spare fuse holders and fuses are available from electrical outlets. If the socket outlets in your home or
office are not suitable for this product's plug, the plug must be removed and disposed of safely. Attempts to
insert the plug into the wrong socket is likely to cause electric hazard. A replacement plug should be wired
according to the following instructions:
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of
flexible plastic. This product is earthed; the wires in the cord set are colour coded in the following way:
H430
BLUE
BROWN
GREEN & YELLOW
The diagram below shows the key features of a correctly
wired three-pin mains plug.
Instructions for Use
NEUTRAL
LIVE
EARTH
v001: 13/11/20