CLARTE LIGHTING 601LED-PAR16 Series Instruções de instalação
Procurar online ou descarregar pdf Instruções de instalação para Equipamento de iluminação CLARTE LIGHTING 601LED-PAR16 Series. CLARTE LIGHTING 601LED-PAR16 Series 2 páginas.
Imprimir páginaSMR1-601-NC-PAR16
Installation Instructions
Install fixture frame above ceiling (lines 1-4)
1. Cut a 3 1/4" Dia. Hole in Ceiling tile
2. Insert two hanger bars into the slots located on either side of the plaster frame.
The nail-in tabs point away from the fixture. Repeat on the other side.
3. Fasten the hanger bars to the joist using screws or nails. The bottom of the bars should be flush with the
bottom of the joist. Slide the fixture along the hanger bars to desired position and secure by depressing
one set of the plaster frame prongs together.
4. Feed the flex with the supply wires to the junction box. Make your electrical connections Black to
Black / White to White and replace snap-lock cover.
www.clartelighting.com
( New Construction)
READ AND FOLLOW ALL SAFETY AND INSTALLATION INSTRUCTIONS CAREFULLY.
TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION.
975 N. Todd Ave. Azusa, CA 91702
Wiring Diagram
Black
White
Transformer
Ground
Tel. No. (626) 261-4242
SAVE THESE INSTRUCTIONS
Black
White
Ground
Fax No. (626) 598-3750
Power