Clarus DUET Manual do Proprietário - Página 10

Procurar online ou descarregar pdf Manual do Proprietário para Fonte de alimentação Clarus DUET. Clarus DUET 13 páginas.

Imprimir página

PLANNING YOUR AC CONNECTIONS

CONNECTING COMPONENTS TO CLARUS DUET

On the top panel there are two (2) AC outlets. For maximum performance, connect only high current components into

the HIGH CURRENT outlets. For convenience, any component may be connected into Duet's outlets without causing

harm to the individual component. However, they may not be afforded maximum filtering and conditioning.

MAKING CONNECTIONS

All components in a system must be connected to a power conditioner in order for the system to be protected from

electrical disturbances and to achieve maximum noise filtering and line conditioning benefits. Failure to do this will

degrade system performance and leave it vulnerable to electrical damage.

TROUBLESHOOTING

Symptom

Possible cause

Clarus Duet will not

The Clarus Duet is not receiving

power up

power

Circuit breaker is tripped

Protection Fault LED

Indicates the internal surge

is on

protection is inoperative. This

happens when the Clarus Duet

receives multiple surges and

sacrifices itself to protect your

electronics.

The Polarity LED is

This indicates that the power

off

cable or the wall outlet the Clarus

Duet is plugged into has it's

polarity inverted

There is an audible

This is common, while annoying,

"thump", "click" or

it can happen when a preamplifier

"pop" coming from

or powers amp's internal power

my speakers during

supply is being turned on. It will

Duet up.

not harm the loudspeakers

CLARUS DUET TECHNICAL SPECIFICATIONS

CLARUS DUET Owner's Manual

Solution

1. Check that the unit is plugged in

2. Check the outlet for power

3. Check that power button is in the ON position

1. Reset the circuit breaker on the side panel

2. If the Breaker continues to trip, try moving one or

more units to another Clarus Power Block, you may

be drawing too much current.

1. Disconnect your electronics from the Clarus Duet

2. Contact your dealer for service

1. Do not operate the Clarus Duet with an inverted line;

call an electrician to have the line repaired.

1. To minimize or eliminate "thumps", "clicks" or "pops",

program the Preamplifier or A/V Processor to turn on

before the Power Amplifiers.

6448 Pinecastle Blvd. Suite 101, Orlando FL 32809

Page 8