DirekTronik Y-key key Instalação

Procurar online ou descarregar pdf Instalação para Adaptador DirekTronik Y-key key. DirekTronik Y-key key 2 páginas. Dual keyboard adapter

Website: http://www.direktronik.se

Tel: +46 (0) 8 52400700

Installing Your Y-key key Dual Keyboard Adapter

1. Check that both keyboards will operate independently on your computer through the same keyboard port:

a) Turn off the computer.

b) Plug one keyboard into the keyboard port.

c) Turn on the computer and make sure the keyboard operates properly after complete boot-up.

d) Repeat for second keyboard.

If it is not possible to get the keyboards to work independently using the same port then they will not work with the

Y-key key.

2. After you are sure the keyboards work independently, install the adapter:

a) Turn off the computer.

b) Plug one keyboard into the port labeled "Primary Keyboard" on the Y-key key (you may need to use the

supplied five to six-pin converter). This is the keyboard the computer recognizes during boot-up.

c) Plug the other keyboard into the port labeled "Secondary Keyboard." NOTE: This keyboard may be

removed and the computer and primary keyboard will continue to operate.

d) Plug the Y-key key into the computer's keyboard port. NOTE: The cord that should go to the keyboard

port on the computer is labeled "Computer's Keyboard Port" on the Y-key key. The port on the computer

should be the same one you used in step 1 above.

e) With the Y-key key installed and both keyboards plugged in, turn on the computer, wait for complete

Fax: +46 (0) 8 52018121

Y-key key

Dual Keyboard Adapter