Acorn 5210A Manual de início rápido - Página 3

Procurar online ou descarregar pdf Manual de início rápido para Câmara de reconhecimento Acorn 5210A. Acorn 5210A 8 páginas.

Pushing the MENU button when in TEST mode will take you into the built in Menu.

You can use the UP & DOWN arrow buttons to move up and down through the menu options and

you can use the left and right arrow buttons to scroll through the various different settings available

If you change a setting remember to push the OK button to save the change!

Camera records images only. Video records videos only. Cam+Video records an image then video.

Photo Size: choose the quality of the image the camera will record, options are 5MP or 12MP.

Video Size: choose the video recording resolution, options are 320x240, 640x480, 1280x720 or

Set Clock: set date and time plus the date format using the up/down arrow keys to change the

number and the right/left arrow keys to move to the next parameter.

Photo No.: if you have the camera set to record images you can choose whether you want a single

Video Length: set the length of video that's recorded each time the camera is triggered from 0-60

seconds, remember the longer the video recording the more battery life will be used (especially if

recording in dark or low light periods as the infrared is the most power hungry component).

Interval: choose how long the camera will wait after finishing one recording before it will start a

Sense Level: set the trigger sensitivity level, options are Off, Low, Normal, High. You can find out

more about the sensitivity levels later in these instruction sheets under the heading "Heat Sensors".

Time Stamp: choose On or Off dependent upon whether you want the date & time showing on

Timer 1 & Timer 2: these Timers allow you to set the camera to only record between certain times

of day. For instance you may want the camera to record only between 6pm and 4am. Use the

left/right arrow keys to change the setting from Off to On and then push the OK button. Now you

can enter the start and stop recording times of your choice. You can choose to use just one or both

Password Set: here you can set a 4 digit password that would then need to be entered whenever you

switch the camera into TEST mode. If you choose to set a password do not lose it! We can reset it

but you'll need to send your camera back to us and there is a £20 charge for this.

Serial No.: this is a number or name for your camera and, if set, will show in the information bar at

Menu Settings

for each selected menu option.

The following menu options are available:

Mode: Camera, Video or Cam+Video

Format: will erase everything on the SD card.

1920x1080.

image or a burst of 2 or 3 images.

new one.

each recording or not.

of the Timers.

the bottom of each recorded image.