CTS CVT-100W2X Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Conversor de multimédia CTS CVT-100W2X. CTS CVT-100W2X 2 páginas. 10/100base-tx to 100base-fx standalone media converter

Imprimir página
5. LED Description
LED
Color
Function
Power
Green Lit when power is available.
Lit when TP port link is up.
TX
Blinking when TP port is receiving
Green
Link/Act
and transmitting data.
Off when TP port link is down.
Lit when Fiber port link is up.
FO
Blinking when Fiber port is receiving
Green
Link/Act
and transmitting data.
Off when Fiber port link is down.
Lit when TP port works in full-duplex
mode.
FDX
Green
Off when TP port works in half-duplex
mode.
Lit when TP 100M port link is up.
Speed
Green
Off when TP 10M port link is up.
Lit when both TP and Fiber port links
Green
are up.
Status
Lit when either TP or Fiber port link is
Orange
down.
6. Technical Specifications
Standards
IEEE 802.3 & IEEE 802.3u
Interface
1 X 10/100Base-TX RJ-45
1 X 100Base-FX SFP
2K Entries
MAC Table
10Base-T: 14,880 pps
Forward & Filter Rate
100Base-TX: 148,800 pps
(64 Bytes)
LED
Power, FDX, Status, Speed,
FO Link/Act, TX Link/Act
Power
DC 5V, 1.6A
2.2W
Power Consumption
0.48Kg
Shipping Weight
71(W) x 94(D) x 26(H)mm
Dimensions
Operating: 0 ~ 50
Temperature
Storage: -20 ~ 60
Humidity
5% ~ 90% RH non-condensing
Certification
FCC/CE Class A
Media
TP:
Cat. 5 UTP cable
Fiber: 50/125 or 62.5/125
multi-mode
9/125
* Please contact us for further reports and updates.
NOTE: Specifications may change without prior notice.
7. Link Alarm
Link Alarm allows users to easily identify and diagnose the
linking status. If Link Alarm is enabled (PIN 4 is set to ON),
the UTP and fiber port can link up only when both linking
conditions are good. In addition, if the fiber or UTP port link
is down during the operation, the other port link will also be
turned into the "Down" status to alert the user. Configure
Link Alarm DIP switch as "Enabled" status, it provides
users transparent link indication between two network
devices interconnected by CVT-100W2X.
If Link Alarm is disabled, the UTP and fiber port will link up
based on their individual linking condition. Furthermore, if
the fiber port link is down during the operation, the UTP
port link will not be turned into the "Down" status, and vice
versa.
8. Fiber Transceiver Information
100M Wave-Length WDM:
TYPE
Connector Type
TX Wavelength
RX Wavelength
Typical Distance
Min TX PWR
Max TX PWR
Sensitivity
Link Budget
NOTE: Specifications may change without prior notice.
Contact Information
Connection Technology Systems INC (CTS)
C
o
18F-6, No.79, Sec.1, Xintai 5th Rd., Xizhi Dist.,
o
C
New Taipei City 221, TAIWAN, R.O.C.
TEL: +886 2 26989661 FAX: +886 2 26989662
m
m single-mode
W2A
W2B
W2A
W2B
(SM-20)
(SM-20)
(SM-40)
(SM-40)
SC
SC
SC
SC
1310nm
1550nm
1310nm
1550nm
1550nm
1310nm
1550nm
1310nm
20 Km
20 Km
40 Km
40 Km
-14.0dBm -14.0dBm
-8.0dBm
-8.0dBm
-8.0dBm
-8.0dBm
0dBm
0dBm
-31.0dBm -31.0dBm -34.0dBm -34.0dBm
17.0dB
17.0dB
26.0dB
26.0dB
CVT-100W2X
10/100BASE-TX to
100BASE-FX Standalone
Media Converter
User's Guide
Version 4.0