Lenovo ThinkCentre Tiny-in-One 23 Manual do utilizador - Página 32
Procurar online ou descarregar pdf Manual do utilizador para Ambiente de trabalho Lenovo ThinkCentre Tiny-in-One 23. Lenovo ThinkCentre Tiny-in-One 23 45 páginas.
Imprimir página
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it
yourself. Before calling your dealer or Lenovo, try the suggested actions that are
appropriate to your problem.
Table3-2.Troubleshooting
Problem
The words" Out
of Range" are
shown on the
screen, and the
power indicator is the monitor.
flashing green.
The image quality The video signal Be sure the signal cable is
is unacceptable.
The image quality
is unacceptable.
The image quality The automatic
is unacceptable. image setup
The power
indicator is not lit
and there is no
image.
Possible cause
Suggested action
The system is set ● If you are replacing an old "Selecting a supported
to a display
monitor, reconnect it and display mode" on page
mode which is
adjust the display mode to
not supported by
within the specified range
for your new monitor.
● If using a Windows
system, restart the system
in safe mode, then select a
supported display mode
for your computer.
● If these options do not
work, contact the
Customer Support Centre.
cable is not
firmly plugged into the
connected with
system and monitor.
the monitor or
system
completely.
The color
Select another color setting
settings may be
from the OSD menu.
incorrect.
Perform automatic image
setup.
function was not
performed.
● The monitor's ● Be sure the power cord is "Setting up your monitor
power switch
connected properly.
is not switched ● Be sure the outlet has
on.
power.
● The power
● Power on the monitor.
cord is loose or
disconnected.
● Try using another power
cord.
● There is no
power at the
● Try using another
outlet.
electrical outlet.
Reference
®
"Setting up your monitor
4
"on page
"Adjusting your monitor
15
image" on page
"Adjusting your monitor
15
image" on page
4
"on page
Chapter 3 Reference information
19
27