Lenovo ThinkSystem SN850 Manual do produto - Página 33
Procurar online ou descarregar pdf Manual do produto para Ambiente de trabalho Lenovo ThinkSystem SN850. Lenovo ThinkSystem SN850 44 páginas. Compute node type 7x15
Também para Lenovo ThinkSystem SN850: Início rápido (2 páginas)
Imprimir página
Table 27. Light path diagnostic panel LEDs
LED
Meaning
LIGHT PATH
The light path diagnostics panel is operational.
SYSTEM
A system board error is detected.
BOARD
NMI
A non-maskable interrupt (NMI) occurred.
CPU MISMATCH The processors are mismatched.
TEMP
An over-temperature condition occurred that was critical enough to shut down the server.
MEMORY
A memory fault occurred. The corresponding DIMM error LEDs on the system board are also
lit.
STORAGE BP 1
A hard disk drive backplane error has occurred.
M.2
A M.2 backplane error has occurred.
The front of the server also houses an information pull-out tab. See
tab shows the network information (MAC address and other data) to remotely access XClarity Controller.
Remote management
Lenovo XClarity Controller (XCC) is an all-new embedded management engine common in every
ThinkSystem server.
There are two ways to access the management processor:
Command-line interface. To access the CLI interface, use SSH to log in to the management
processor.
Web-based interface. To access the web-based interface, point your browser to the IP address for
the management processor. The new intuitive interface includes at-a-glance visualizations and
simple access to common system actions. The dashboard is shown in the following figure.
Figure 11. Lenovo XClarity Controller dashboard
Lenovo ThinkSystem SN850 Server
Figure 2
for the location. A label on the
33