Lenovo ThinkSystem SR650 Manual de início rápido - Página 7

Procurar online ou descarregar pdf Manual de início rápido para Servidor Lenovo ThinkSystem SR650. Lenovo ThinkSystem SR650 14 páginas. -48 v dc

Step 3.

Press the release tab toward the handle and carefully pull the handle at the same time to slide the

hot-swap power supply out of the chassis.

Note:

Slightly pull the power supply upwards when sliding the power supply out of the chassis, if you

have installed one of the following CMA kits:

• 2U CMA Upgrade Kit for Toolless Slide Rail

• Toolless Slide Rail Kit with 2U CMA

Figure 5. Hot-swap power supply removal

After removing the hot-swap power supply:

1. Install a new power supply or install the power-supply filler to cover the power supply bay. For more

information, refer to "Install a hot-swap power supply" on page 7.

Important: To ensure the proper cooling during the normal server operation, both of the power supply

bays must be occupied. It means that each bay must have a power supply installed; or one has a power

supply installed and the other has a power supply filler installed.

2. If you are instructed to return the old hot-swap power supply, follow all packaging instructions and use

any packaging materials that are provided.

Install a hot-swap power supply

Use this information to install a hot-swap power supply.

"Read the

installation Guidelines" in

Chapter 3 of ThinkSystem

SR650/SR630/SR550

Maintenance Manual.

The following tips describe the type of power supply that the server supports and other information that you

must consider when you install a power supply:

"ATTENTION:

Static Sensitive Device

Ground package before opening"

on Chapter 3 of ThinkSystem

SR650/SR630/SR550

Maintenance Manual.

7 7