Lenovo 10QX Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Monitor Lenovo 10QX. Lenovo 10QX 49 páginas.

Use a type B-to-type A USB cable as shown. Connect type B connector of this cable to the

USB 3.0 upstream connector on the monitor. Then, connect type A connector of the cable

to a USB connector on the computer. To locate the USB 3.0 upstream connector on the

monitor, see

"Locating connectors and controls on your monitor"on page 1-3.

Connect one end of the USB cable to the USB downstream terminal on the side of the

monitor, and connect the other end of the USB cable to an appropriate USB port on your

device.

Note: The USB downstream port does not provide power while the monitor switch is off.

*: Depending on many factors such as the processing capability of peripheral devices, file

attributes, and other factors related to system configuration and operating environments, the

actual transfer rate using the various USB connectors on this device will vary and is typically

slower than the data rates as defined by the respective USB specifications: - 5 Gbit/s for USB

3.1 Gen 1; 10 Gbit/s for USB 3.1 Gen 2 & 20 Gbit/s for USB 3.2.

1-9

Chapter 1.